Nulon Pro-Strength Upper Engine Cleaner (UEC150) 150gm

Nulon Pro-Strength Upper Engine Cleaner (UEC150) 150gm

$14.90 inc. GST

In stock

$14.90 inc. GST

Nulon Pro-Strength Upper Engine Cleaner helps restore engine performance, by efficiently removing carbon deposits, gums and varnish from air intake systems and combustion chambers without the need to dismantle the engine.

Availability: 5 in stock SKU: 9311090005341

Description

Nulon Pro-Strength Upper Engine Cleaner helps restore engine performance, by efficiently removing carbon deposits, gums and varnish from air intake systems and combustion chambers without the need to dismantle the engine.

Benefits:

  • Removes gum, varnish, sludge and carbon deposits from your vehicles intake system
  • Suitable for both carburettored and fuel injected petrol systems
  • Cleans throttle plates, intake manifold and combustion chamber during use
  • Restores lost power and fuel economy with the need to dismantle the engine
  • Easy application by simply spraying into the intake with engine running at fast idle
DIRECTIONS FOR USE:
Shake the can before use, warm up the engine to normal operating temperature and for best results follow through each of the following steps:
  1. Throttle plate cleaning: Turn off engine and disconnect air intake duct from throttle body. Spray sparingly onto the throttle plate, wipe throttle body gently to remove excess liquid. Reconnect the air intake duct to the throttle body.
  2. Inlet manifold and intake valve cleaning: Disconnect a vacuum hose from the inlet manifold and start the engine. With the engine running at fast idle spray approximately half of the can through the vacuum line using the spray tube supplied.  Then turn OFF the engine and leave to soak for 5 minutes.
  3. If spark plugs are difficult to remove proceed to Step 4:
    Piston crown cleaning: While the engine is still turned off, remove all spark plugs. Spray a 2 second burst into each spark plug hole. Leave the engine to stand for 5 minutes. NOTE: Before reinstalling the spark plugs, cover up the spark plug holes with clean unused paper or cloth and crank the engine several times. Reinstall spark plugs.
  4. Final cleaning: Start the engine and disconnect a vacuum hose from the inlet manifold before spraying the rest of the can into the vacuum line while revving the engine. Reinstall the vacuum line and keep the engine running at fast idle until all the remaining cleaner is purged from the exhaust system.

This treatment is recommended for every scheduled service.

Brand

Nulon