Hi-Tec 5L HYDRAULIC OIL 46 HI5-2714
$33.30 inc. GST
Hydraulic Oils are blended from high-quality mineral oils possessing a high viscosity index and low pour point. These oils give a long trouble-free service life and will be chemically stable under severe operating conditions. They give excellent protection against corrosion; resist emulsification and any formation of unwanted stable foam.
- Description
- Brand
Description
Hydraulic Oils are blended from high-quality mineral oils possessing a high viscosity index and low pour point. These oils give a long trouble-free service life and will be chemically stable under severe operating conditions. They give excellent protection against corrosion; resist emulsification and any formation of unwanted stable foam. The continuing trend towards higher hydraulic system pressure permits higher performance and reductions in pump and equipment sizes. At the same time, the hard-working hydraulic oil is called upon to lubricate, seal and cool the working components under increasing temperature, turbulence and pressure. Any entrained air must be readily released as pressures often exceed 7 mpa (1000 psi) and heavy pump water can only be avoided by using oils containing anti-wear additives. Hydraulic Oils are formulated to meet all these requirements, using paraffinic, high viscosity index mineral oil, augmented with performance additives including a zinc anti-wear treatment.
BENEFITS:
The performance benefits of Hydraulic Oils include:
- Superior hydrolytic stability
- Outstanding thermal and oxidation stability
- Good demulsibility and anti-foam properties
- Excellent EP performance
- Excellent rust protection
- Lower tendency to block filters
- Reduced pump wear
SPECIFICATIONS
Hydraulic Oils meet or exceed the requirements of many international tests and specifications for industrial and mobile hydraulic systems including:
- Vickers I-286-S, M-2950-S
- AFNOR NFE 48-603 HM (now ISO 11158))
- Hagglunds-Denison HF-0, HF-1, HF-2
- AFNOR NFE 48-691 (wet)
- ASTM D 6158
- SS155434
- DIN 51524, Part 2 (HLP)
- ISO 6743/4 (HM)
- US Steel 126, 136, 127
- SEB 181 222
- Racine, variable volume vane pumps
- VDMA 24318
- Commercial Hydraulics
- ISO 11158 HM
- Fives Cincinnati P-68, P-69, P-70
- Eaton Brochure 03-401-2010
Hi-Tec suggests that the equipment manufacturers’ recommendations for viscosity grade, performance requirements and general operating conditions should be checked prior to use.
